Showing 1 to 141 out of 141
Original early production black bridle leather scabbard. The leather body is in nice condition with a good tight seam running up the back with only minor crazing to the finish. Brass scabbard tip was… (632-85). Learn More »
This is a well-worn Civil War percussion cap pouch. This pattern has the closing tab as a continuation of the outer flap. This latch tab is unbroken. The surface of the leather on the outer flap shows… (632-86). Learn More »
Pattern 1861 US cartridge box in good unissued condition. The outer flap is cut for “US” cartridge box plate but never had one mounted. There is scuffing of the bridle leather surface overall from… (2024-1894). Learn More »
Offered here is a gunner’s accoutrement set consisting of a leather fuse pouch and a friction primer pouch on a rarely seen gunner’s waist belt. The leather waist belt is a rare piece. This… (1268-587). Learn More »
This leather box is for carrying an infantryman’s supply of .58 caliber rifle musket cartridges. The large outer flap remains soft and flexible with good finish overall; there is one small… (1268-219C). Learn More »
A very nice example of a US militia cartridge box with wood block bored for 24 cartridges, the standard and specified minimum load under the militia act, and set up for wear on a waist belt with two… (1202-489). Learn More »
$695.00
ON HOLD
This is the regulation Civil War artillery gunner’s or fuse pouch, complete, in good condition, and nicely marked on the outer flap above the stitching for the latch tab, “U.S. / WATERVLIET /… (1202-449). Learn More »
$550.00
SOLD
Offered here is a British Pattern 1859/60 Cartridge Box of the post-1860 style without the integral cap pocket and tool strap. The box is constructed on black bridle leather with smooth surfaces on… (1268-001). Learn More »
$3,950.00
SOLD
This is a very nice Civil War artilleryman’s waist belt and buckle with a frog for the 1832 short artillery sword that shows actual use. The cast brass eagle buckle has a three-piece applied German… (1286-611). Learn More »
This is an officer’s sword belt rig in good condition. Belt is constructed of folded leather that is stitched. Nice double-line stitching along outer edges on the belt. Belt leather measures… (1268-274). Learn More »
This unissued, buff leather, Model-1851 sword belt comes complete with sword hangers and all matching brass hardware. This “artillery” belt was never intended to have the shoulder strap. The belt… (1268-609). Learn More »
Original pistol cartridge box with clean leather and tight seams to hold Army size (.44 cal.) cartridge packs. Likely unissued. Outer flap remains supple. Light crazing overall. Unmarked. Latch tab… (1268-274A). Learn More »
$145.00
SOLD
The belt plate is a Viriginia two-piece interlocking plate of very good quality. Belt loops for tongue and wreath are plain, slightly beveled. The wreath is a laurel wreath with berries, secured with… (1283-03). Learn More »
This is a scarce and early-war or prewar example of a U.S. Allegheny Arsenal marked enlisted man’s sword belt plate. The pattern was regulation for cavalrymen, artillerymen armed with the saber or… (1268-393). Learn More »
This non-excavated Federal belt plate is of the regulation 1839 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear “US”. Face shows only… (1268-219). Learn More »
$475.00
ON HOLD
Very fine condition brown leather fuse pouch. Made by J. Darrow in Augusta, Georgia. The leather remains in remarkable condition with some signs of use and minor scuffing, but absolutely no crackling… (1268-509). Learn More »
$7,500.00
SOLD
This is a complete percussion cap pouch. The leather is clean and the whole piece is in very good overall condition. There is some crazing to the finish on the outer flap. This flap features an oval… (1268-219A). Learn More »
This buff leather, Model-1851 sword belt comes complete with sword hangers (one detached but present), all brass hardware, and a very fine Virginia State Seal belt plate. No shoulder strap… (1268-357). Learn More »
This buff leather, Model-1851 sword belt comes complete with sword hangers, shoulder attachment (Sam Brown strap), and all matching brass hardware. The belt shows some evidence of use with a "rubbed"… (1268-756). Learn More »
This is a Confederate-made percussion cap pouch. The leather is in very good overall condition. This pattern has the "square" outer flap with closing tab sewn to the underside. The latch tab is broken… (1268-357A). Learn More »
This is a Cavalry shoulder sling designed for use with weapons fitted with sling rings (musketoon, rifled carbine, and all patented breech-loading carbines). The sling was to be worn over the left… (1268-756D). Learn More »
The M1848 Dragoon was slightly lighter than the previous Walker. However, the Ordnance Department believed it was still too large, heavy and awkward to be carried in anything but pommel holsters. This… (1268-756B). Learn More »
$895.00
ON HOLD
This is a Civil War-era percussion cap pouch. This pattern has the closing tab as a continuation of the outer flap. This latch tab is unbroken. Center of flap features "WHITE" oval sub-inspector's… (1268-756E). Learn More »
$135.00
ON HOLD
This is a non-commissioned officer’s sword belt in good condition. Belt is constructed of heavy buff leather that has given to a deep brown color throughout. As it is currently configured, the belt… (2025-197). Learn More »
After the Civil War, state sponsored militias were championed by Army and Navy veterans to maintain military readiness without committed enlistments. This is an example of a New York State belt used… (1216-192). Learn More »
This is a brown leather “Slim Jim” holster for M1851, M1861 Colt Navy, and subsequent conversions. Holster body is one piece, joined by a single seam stitch along the rear. Stitching remains… (1179-700B). Learn More »
This Civil War artifact is an original, leather haversack typical of the accoutrements carried by officers, both Confederate and Federal, while they were in the field. A private purchase, this large,… (1268-277). Learn More »
Here is a good example of a Model 1839 leather cartridge box for the M1841 Mississippi rifle. Constructed from heavy black bridle leather, this box measures 6.5” across, 4” high, and is 1.75”… (1268-159). Learn More »
About 1880 New York adopted a version the US M1872 belt plate substituting “NY” for “US” for garrison and dress wear. These are sometimes referred to as the Hagner pattern, having been first… (1216-195). Learn More »
This is a “McKeever” style cartridge box. Complete and original and in solid condition. Black leather box “hinged” at the bottom with a brass rod. Leather closure tab fastens to brass finial… (172-5459). Learn More »
$550.00
Originally $695.00
This is a brown leather belt holster in good condition for a Colt .32 caliber percussion pocket revolver with a 5-inch barrel. The holster is a simple three-piece construction of the body and flap in… (172-5400). Learn More »
$375.00
Originally $475.00
Several holsters of this configuration for navy size revolvers are illustrated in Meadows and are seen in period photos. They key point of identification is the use of an elongated flap extending in… (172-5395). Learn More »
$650.00
Originally $825.00
Post- Civil War cartridge box is marked, “NO.2” on the reverse. Stitched and riveted latch tab and finial are present. Leather has moderate to heavy crazing. Stitching is tight except for sides,… (172-4512). Learn More »
$85.00
Originally $110.00
This knapsack is clearly identified in old, original, dead-real white paint on the upper back of the outer flap with “L.M.L.” in block letters, the soldier’s initials, and his unit in an arc… (846-589). Learn More »
$4,500.00
ON HOLD
A light weight, die stamped rolled brass belt plate with raised border and script letters “SNY” in the center. See O’Donnell and Campbell Plate 868 for this plate. There are several variations,… (1216-217). Learn More »
O’Donnell and Campbell date this plate ca. 1890-1905 and show it as Plate 870 in company with some similar plates used by other states about the same time. This is a die-struck rolled brass… (1216-202). Learn More »
$150.00
ON HOLD
A very good example of a ca. 1895-1910 ornate belt plate with inner raised border and a “5” flanked by “VC” on a stippled ground. The plate is O’Donnell and Campbell Plate 876 and… (1216-194). Learn More »
This saddle fits the design characteristics of the Grimsley pattern 1844, 1847 and Artillery Driver saddles commonly used throughout the war by mounted servicemen, particularly within the artillery… (2024-2384). Learn More »
$795.00
SOLD
Item is made of tarred or painted canvas. Closed the exterior meas. approx. 15.50 x 16.00 x 4.00 inches. The outer flap is in good condition with only minor surface finish loss on three of the four… (381-19). Learn More »
$1,200.00
Originally $1,550.00
For U.S. Cavalry carbines, caliber .45-70/.50-70. Black bridle leather “U.S.” embossed flap, with finial & straps, 24 webbed interior cartridge slots, and two reverse belt loops. Front flap… (990-16). Learn More »
$180.00
Originally $225.00
This percussion cap pouch is in a nice condition, with light crazing on the outer flap near the folding point and on the belt loops. More finish wear is present on the outer tab, but no cracking is… (286-1399). Learn More »
This an 1861 pattern U.S infantry cartridge box for the.58 caliber rifle musket bearing several sets of owner initials and a painted unit designation on the outer flap. The box is complete with all… (490-7125). Learn More »
Orders existed prior to the outbreak of the war for arsenals to keep on hand .69 cal. round ball as well as .58 cal. elongated ball cartridge boxes. For example, the New York Arsenal was ordered to… (490-7141). Learn More »
A very good condition black leather cartridge box bearing a cartridge box plate consisting of an entwined “NG” for National Guard, and a superimposed “7” for the 7th Regiment. These are known… (1216-228). Learn More »
This pistol cartridge box is in a remarkably nice condition given its age. All stitching is fully intact and strong, and the only true signs of use and wear are some folding creases on the outer… (490-7140). Learn More »
Very nice condition leather fuse pouch. The leather of the outer flap is in very good condition. There is some crazing on the top “hinge” area of the flap. There is a deep “US” stamp on the… (864-14). Learn More »
This pattern of sling to carry the carry the cavalry carbine was in use from before the Civil War up through the Indian Wars until the introduction of the narrower 1885 pattern. This is an assembled… (1256-28). Learn More »
This US cartridge box is maker marked on the inner flap by Gaylord and is the standard 1857 pattern using belt loops on the back, shoulder belt buckles on the bottom, and a latch tab on the front that… (1256-01). Learn More »
This 18.25” sword knot is constructed of black bridle leather and remains in excellent condition. The leather is dry but remains supple and only shows very light cracking on the outer finish.… (2023-3173). Learn More »
This holster features hallmarks of Confederate wartime manufacture, including a press brass button closure, hand stitched seams, hand stitched closure flap, and hand stitched belt loop attachment. The… (1202-190). Learn More »
A very good condition regulation scabbard for the socket bayonet used on the Model 1855 .58 Cal. Rifle Musket, and later patterns like the M1861, etc. The scabbard body is solid, a bit soft,… (172-6063). Learn More »
US regulation scabbard for the socket bayonet used on the Model 1855 .58 Cal. Rifle Musket, and later patterns like the M1861, etc. This is in good condition, showing issue and use, with some… (172-6059). Learn More »
This is one of the rarer variants of the standard US Model 1855-type socket bayonet that was produced near the end of the Civil War. The bayonet was manufactured for use with the US Model 1865 Joslyn… (2024-1874). Learn More »
This cartridge box sling measures 68” overall and is made with separate billets sewn to each end for the buckles of a cartridge box. The belt itself is 59” long and 2” wide, with the billets 5… (2024-1341). Learn More »
These belt plates were robust enough to have a long service life even after their official replacement by the 1851 pattern rectangular, eagle belt plate. In Civil War photographs they occasionally… (1256-26). Learn More »
This non-excavated Federal belt plate is of the regulation 1839 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear “US”. Face shows only… (1256-47). Learn More »
This cartridge box is an example of the "Pattern 1861” infantry cartridge box. Outer flap exhibits light crazing; mostly on hinge area and lower corners. Outside edges of flap are tooled. Oval… (1256-03). Learn More »
Box is for carrying the .58 caliber rifle musket cartridge. Outer flap is in good condition. The leather is clean and smooth with an oval “US” plate attached by a leather thong. The face of the… (1256-02). Learn More »
Officer's waist belt of thin leather folded and stitched. Complete with Old English "NY" buckle, sword hangers with spring clips. The belt is about 1.75" wide and solidly stitched. Leather remains… (172-6042). Learn More »
Original pistol cartridge box with clean leather and tight seams to hold Army size (.44 cal.) cartridge packs. Likely unissued. Outer flap remains supple. Light crazing overall. A script “US”… (1256-27). Learn More »
Original black bridle leather scabbard and frog. The body is in very good condition. The stitched seam running up the back is complete and unbroken. Leather shows moderate crazing but little loss of… (490-3266). Learn More »
This is a very nice early, American-made, set of infantry or militia accoutrements. Set consists of a cartridge box on a waist belt with a sheet brass buckle and a bayonet with scabbard and belt frog… (401-45). Learn More »
$950.00
Originally $1,750.00
Frog is complete. It is unmarked and has wear to its blackened finish throughout. [gr][ph:L] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB SITE, MAY BE… (1235-484). Learn More »
Leather belt is in overall good condition, with some light crazing. Edges have some slight cracks. Belt has a heavy cotton interior with the leather wrapped around, with a hand-sewn horizontal seam on… (2024-1630). Learn More »
Case looks to be solid and complete. Measures 10 ¾” x 3” x 3”. The flap is marked “ROCK ISLAND ARSENAL.” It shows some age wear. [gr][ph:L] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM,… (160-122). Learn More »
Made of black bridle leather this Civil War period sling meas. approx. 50.75 inches long x 2.50 inches wide. The length measurement is with the sling unbuckled and lying flat and measuring from the… (1119-05). Learn More »
Included is a period handwritten tag telling the story of the belt. Belt shows a good amount of use wear. [gr] [ph:L] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE… (160-28). Learn More »
This is very good example of the New Jersey National Guard variation of the US Model 1872 belt plate on its original belt. The U.S. version was adopted in 1872 and remained regulation until 1902 for… (1216-198). Learn More »
Made of brown bridle leather and measuring 9” long x 3.5” wide. Semi-scalloped profile with belt loop. Stitched down both sides. “Pocket” is double stitched and rivetted. Cut-out for… (1179-558). Learn More »
A Cavalry shoulder sling designed for use with weapons fitted with sling rings (musketoon, rifled carbine, and all of the patented breech-loading carbines). The sling was to be worn over the left… (2024-183). Learn More »
This holster pattern was adopted by the Navy in 1889 for the new .38 Caliber double-action revolvers ordered that year, most of which were returned to Colt for alteration to the Model 1895 cylinder… (431-72). Learn More »
This is a military non-regulation holster, unmarked, and typical of those purchased privately by officers or making their way into service by way of early war state troops and in the case of… (431-73). Learn More »
Excellent condition leather scabbard for a socket bayonet for the Austrian Lorenz rifle. Measures approximately 20” long overall. Iron throat features characteristic “X” opening for the… (1179-2040). Learn More »
This is a very good condition early-war holster for a .36 caliber revolver with full military flap, wide belt loop secured by stitching and three rivets, toe plug, and sewn latch tab. The stitching is… (286-1332). Learn More »
$695.00
ON HOLD
Box is for carrying the .58 caliber cartridge. Outer flap is in excellent condition. The leather surface is very smooth and mostly clean with some minor edge wear. The remains of the broken latch tab… (2023-1367). Learn More »
$1,295.00
ON HOLD
Leather holster for the Model 1911 .45 pistol. Flap has a nicely stamped “US” in an oval. Reverse is marked “WARRAN LEATHER GOODS CO.” over “1918” over “J.A.O.” Leather surface is in… (362-1150). Learn More »
This is a great example of a Federal cap box in pretty much new condition, as it would have come out of the crate for issue. The black finish is superb, with strong color and no flaking. Seams are… (1216-94). Learn More »
Pattern 1864 US cartridge box in good condition. The outer flap is boldly embossed “US” in the center and has a sub-inspector’s oval stamp on the lower, left corner. There is some light crazing… (490-6255). Learn More »
The leather is in nice, smooth condition with a pleasing dark brown tone. The latch tab is stitched to the underside of the flap. This tab remains unbroken but well worn. The outer flap is only… (490-6254). Learn More »
This Confederate cap box shows the maker was imitating to some degree the US pattern that came into use in early 1862, having a contoured, one-piece cover with integral latch tab extension fastening… (1130-03). Learn More »
This is a scarce Merrill cartridge box supplied by the company to the US government along with its rifles and carbines during the Civil War. Paul Johnson believed they were delivered with all carbines… (490-5258). Learn More »
This scarce 1855 rifleman’s belt rig is in good condition and complete with its two-piece frame buckle, brass belt loops, and bayonet frog. Constructed of black leather, the belt is fitted at either… (1179-498). Learn More »
This is a link strap of the type used by cavalry forces during the Civil War and on into the Indian Wars. These link straps were used to enable a dismounted rider to lead his horse. The trooper simply… (1179-436). Learn More »
This waist belt comes from the Texas Civil War Museum and is typical of prewar militia belts that often show up in early Civil War photographs of Confederate volunteers equipped by necessity with… (1179-609). Learn More »
This is a leather shoulder sling designed for use with Civil War muskets. The sling has a fixed leather loop at one end and a brass wire hook on the other, which is mounted under a sewn down flap. The… (1179-553). Learn More »
Leather is in very nice unused condition. All straps and buckles are present. Scabbard is marked in four lines “US” over “FULTON” over “MFG. CO.” over “1943.” Leather surface shows… (1216-28). Learn More »
This belt holster was made for a small revolver, likely a “pocket model” of some sort, very typical of those carried by infantry line officer as a sidearm for personal defense in addition to the… (1179-628). Learn More »
Brown leather sling with a functioning loop at one end that is fastened by a brass stud and a double pronged hook at the other. Sling meas. approx. 1.08 inches wide x 66.00 inches long and has two… (172-5943). Learn More »
Cartridge box is the Pattern of July 1864, Type 2 for .58 elongated ball cartridges. The leather on the box is excellent showing only minor surface wear. The exterior flap has a strongly embossed… (1205-07). Learn More »
Box is in good used condition. Outer flap is shield shaped with latch tab sewn to the underside of the flap. Leather surface shows some moderate wear from use, storage, and age. Tab is solid. Clearly… (490-5566). Learn More »
A fine example of the Cavalry shoulder sling designed for use with weapons fitted with sling rings (musketoon, rifled carbine, and all of the patented breech-loading carbines). The sling was to be… (2023-2605). Learn More »
Regulation belt made of blackened buff leather. This pattern belt and japanned iron friction buckle seems to have appeared in 1862. It is specifically detailed as a regulation issue item by the… (1000-576). Learn More »
$1,800.00
Originally $2,250.00
White buff leather belt that is slightly stiff with heavy surface dirt from age and storage. One of the sections has a 1.50 inch piece of leather missing on one edge. One end of the belt passes… (344-920). Learn More »
$875.00
Originally $1,250.00
ON HOLD
Brown buff leather belt in good condition. Leather is a little dry causing the inside seam in one small section to split but the rest is solid. Belt plate and keeper have matching benchmark numbers of… (344-915). Learn More »
$1,575.00
Originally $2,250.00
This is a nice example of a Confederate-made percussion cap pouch. In good condition, this pouch looks much like its northern counterpart. The whole pouch is constructed of leather which has been… (1000-683). Learn More »
$715.00
Originally $895.00
Box is rectangular in shape. It meas. approx. 4 5/16 long x 2.75 inches high x 1.00 inch wide. Outer flap is in good condition. The face of the flap is very nice but the top has heavy crazing and some… (1000-682). Learn More »
$2,800.00
Originally $3,500.00
Unissued buff leather frog for a saber bayonet. Approx. 9" long x 3.75" wide. About 2 inches of the stitching on the left side has separated. This piece is in great condition and was never issued. … (490-5340). Learn More »
Small leather box to hold friction primers were carried on the belt (past terminology designated this type box as a Navy fuse box). The box is relatively square in shape to accommodate the shape of… (490-5342). Learn More »
The leather on this box is in good condition. The outer flap shows scattered moderate surface crazing with a small Pattern 1839 oval US plate attached at center. The latch tab is sewn to the underside… (490-3649). Learn More »
Belt is made of one piece of leather with the leather from each edge folded toward the middle. Belt meas. approx. 40.25 inches long x 1.75 wide. The interior of the belt has a good straight seam… (1052-236). Learn More »
The pattern 1839 rifleman’s cartridge box was meant to be suspended from the waistbelt and was produced with vertical loops only on the reverse. This box shows signs of having been altered to use… (490-5224). Learn More »
Leather box in very nice condition still contains its tin tubular insert. Exterior leather flap is in nice smooth pliable condition. It is decorated with three parallel tooled lines going diagonally… (2023-281). Learn More »
They don’t get much more “Johnny Reb” than this cartridge box, which has the additional allure of a set of soldier’s initials, “W V T” lightly, but very legibly, carved into the outer… (766-1821). Learn More »
The knapsack offered was the product of S. Isaac and Campbell of London. Here, in part, is what William Albaugh had to say about this company in his book Confederate Edged Weapons.".... Isaac,… (1164-54). Learn More »
The black leather of the holster is somewhat stiff but can be coaxed to take a weapon. The leather surface shows light crazing throughout. The holster has a rather wide flap with two parallel rows of… (490-3203). Learn More »
This is a black leather holster made for revolvers. The leather still shows the faint “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model Colt fits into this holster. The… (2022-1071). Learn More »
This leather cartridge box is in exceptional condition. The outer flap is clean and smooth with only the finest of crazing in the finish, mostly in the area of the top “hinge” area. Closing tab is… (490-3650). Learn More »
This medium-size cartridge box mimics the shape of the Mann’s patent box, but without all the associated straps. Made to hold unknown cartridges, but very likely for Sharps or some other… (490-3651). Learn More »
Regulation belt made of blackened leather. This pattern belt and japanned iron friction buckle seems to have appeared in 1862. It is specifically detailed as a regulation issue item by the 4th… (766-1837). Learn More »
$450.00
Originally $550.00
Hard to find, this is a non-regulation leather holster made to accommodate a large revolver such as a Colt or Remington “Army” revolver. The holster measures 12” along the front edge. Holster is… (1052-209). Learn More »
This is a nice example of an American militia cartridge box of the first half of the 19th century. Made of black leather, the flap was painted, likely to give it an easy to maintain shiny surface. The… (490-2793). Learn More »
This is a Cavalry shoulder sling designed for use with weapons fitted with sling rings (musketoon, rifled carbine, and all patented breech-loading carbines). The sling was to be worn over the left… (160-80). Learn More »
This is the regulation sword belt for U.S. officers in the Civil War. The rectangular eagle belt plate with the arms of the U.S. is an early style, likely prewar or very early war, made of stamped… (1052-222). Learn More »
Belt is made of one piece of leather approx. 31.00 inches long x 1.75 wide. The interior of the belt has a sewn seam running down the center while the exterior face of the belt has a tooled line… (490-3646). Learn More »
This is a good example of the Austrian bayonet frog used with bayonet scabbard for the quadrangular-blade socket bayonet of the M1854 Austrian Lorenz. The Lorenz was well regarded and imported by… (490-3745). Learn More »
$265.00
ON HOLD
Black leather belt meas. approx. 1.75 inches wide with a line of stitching outlining each edge. The leather surface shows light to moderate surface finish loss from rubbing and use over the years. The… (2022-957). Learn More »
Black bridle leather cartridge box that looks very much like a US Civil War issue cavalry carbine box. The shape of the body and the flap appear to be the same. It has both roller buckles and the… (490-2796). Learn More »
The leather on this box is in fair condition and has been treated with a leather preservative that has left behind a sticky residue. The outer flap has a good bit of surface finish loss and is… (490-2795). Learn More »
This black saddle leather box began life as a Hagner Number 2 type cartridge box. The inside was altered by adding a wooden box Overall, the leather is in excellent condition. The exterior flap has a… (490-2800). Learn More »
This is a scarce example of a privately purchased belt holster with a military style flap to carry a small .31 caliber percussion revolver, typical of those carried for personal defense by officers… (480-221). Learn More »
$446.00
Originally $495.00
This would make a great addition to a cavalry officer’s display. The breastplate (breast band) is wide, painted yellow in a soft mellow tone, and has black leather edging around a central leather… (490-2561). Learn More »
$2,600.00
Originally $3,250.00
This elegant martingale is trimmed in yellow leather and would make an excellent addition to a cavalry officer’s display. All straps, loops, etc., are in place and secure. Set up as a running… (490-2560). Learn More »
$2,600.00
Originally $3,250.00
Brown leather Confederate artillery fuse pouch is in good condition. This is the leather pouch that went on the side of the Confederate artilleryman. It held his paper time fuses for firing the… (381-20). Learn More »
$3,150.00
Originally $3,950.00
Black leather saddle holsters for the large and heavy Colt Dragoon pistols. Overall, the leather is in good condition but the yoke between the holsters shows heavy surface finish loss. Each side of… (490-2779). Learn More »
$1,450.00
ON HOLD
This is a scarce Civil War cartridge pouch that was used by the State of Massachusetts during the Civil War and occasionally seen in images of Massachusetts Infantrymen. This pouch is of English… (490-1685). Learn More »
$600.00
Originally $750.00
This is a nice brown leather “Slim Jim” holster for M1851 and M1861 Colt Navy conversions. Holster body is one piece sewn down the back seam. Stitching remains strong and unbroken. Geometric… (1142-128). Learn More »
Brown buff leather waist belt that meas. approx. 2.00 inches wide by 39.25 inches long. Interior surface of the belt is the original white color. One end has been cut with holes to accept a belt plate… (734-48). Learn More »
The leather belt is 1.75” wide and approximately 50” long overall. Belt is made of bridle leather with a brass keeper sewn and riveted on one end and a brass adjustment hook riveted to the… (490-2824). Learn More »
The leather belt is 1.75” wide and approximately 42” long overall. Belt is made of bridle leather with a brass adjustment hook riveted to one end and a leather belt loop sewn to the other. The… (490-2812). Learn More »
Leather scabbard is in good condition. The black leather body shows only light wear and crazing. No breaks. Stitching is complete with no splits. Brass tip is in place and is undented; two tacks are… (172-5612). Learn More »
This is an excellent example of O’Donnell and Campbell Plate #700 in American Military Belt Plates. It is complete with its keeper and is on its original belt. The detail of the plate good enough… (490-2626). Learn More »
This scarce 1855 rifleman’s belt rig is in very good condition and complete with its two-piece frame buckle, brass belt loops, and bayonet frog and support straps. Constructed of black waxed-leather… (1142-49). Learn More »
This is a black leather holster made for revolvers. The leather still shows the “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model with long barrel fits into this… (172-5636). Learn More »
This is a black leather holster made to accommodate the Kerr revolver. The leather still shows the “profile” of a revolver cylinder. The holster “pocket” measures approximately 9 ¼” along… (1117-97). Learn More »
Sling dates from the 1950’s or 60’s and is made of brown leather that is in excellent condition. One end has a loop of brown leather held in place by a stud while the opposite end has a “D”… (2020-122). Learn More »
One piece sling made of bridle leather dyed a dark brown with a tooled line along each edge. Sling has one sliding leather keeper and a narrow brass claw hook on one end. The opposite end is doubled… (1037-234). Learn More »
$145.00
ON HOLD
Brown leather sling in overall very good condition. Strap is approx. 2.00 inches wide at center and tapers as it moves toward each end where it is only 1.25 inches wide. Each end has a brass hook for… (1037-238). Learn More »
$145.00
ON HOLD
The leather on the outer flap is supple and in good condition. The latch tab is solid and shows only slight wear. The inner flap has both ears and a worn maker’s mark obscured by crazing. Interior… (M18538). Learn More »
This leather cavalry carbine sling meas. approx. 2.50 inches wide x 52.00 inches long. However, it is difficult to get an accurate measurement on the length due to stiffness and waviness of the… (M25536). Learn More »
This is a very rare find that came out of an artillery collection. Artillery whip has a turned wood handle with a brass cap at the end where the rawhide ties through to attach braided leather whip.… (33-160). Learn More »
$895.00
SOLD
4.25" long with a tapered cut. Used to hold brass cartridge box plates in place. (M12603). Learn More »
Showing 1 to 141 out of 141
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
Image shows Francine in uniform. He wears a non-regulation coat with shoulder straps (Major or Lt. Colonel). Image is clear with good contrast. Mount has two small chips to border along top edge. Reverse has pencil identification. Photographer’s… (2021-1131). Learn More »
May 16 - 18: N-SSA Spring Nationals, Fort Shenandoah, Winchester, VA Learn More »