Showing 1 to 217 out of 217
In 1852, the Navy Department adopted an officer sword which varied slightly from the previous model 1841 Officer’s Sword. The 1852 Navy Regulations described the m1852 Naval Officer’s Sword as a… (2024-1905). Learn More »
This is a very good example of the saber bayonet for the short “two-band” Enfield rifle, imported by both sides in the Civil War. Exact numbers are hard to come by, especially since they were… (1256-67). Learn More »
$225.00
ON HOLD
Original black bridle leather scabbard with frog. This was for the Model 1855 socket bayonet (bayonet not included). The body is in very good condition with just a few scuffs. The seam running up the… (2024-1711). Learn More »
$245.00
SOLD
This 45-70 bayonet is in wonderful condition. Most of the original bluing is present while the locking ring operates as new. The blade is stamped with a strong “US” and a partial “S” in… (2023-904). Learn More »
$175.00
SOLD
A nice example of a m1886 French Lebel bayonet complete with scabbard. This model of bayonet saw service with the French Foreign Legion and the French Army throughout WWI and II. This early model… (490-4165). Learn More »
Wide bladed knife with rounded point designed to cut wood and bamboo to fashion temporary splints, poles, stakes, stretchers, or whatever else might be necessary to aid or evacuate a casualty in the… (169-659). Learn More »
The M1910 bolo knife, made at Springfield from 1910 to 1918, had been issued to aid in cutting through undergrowth and clearing fields of fire. The Model 1917 Bolo was an improvement that omitted the… (169-674). Learn More »
The 1832 short sword had been specified for infantry sergeants and musicians as well as enlisted men of foot artillery. With the distribution of the 1840 sword patterns the sergeants and musicians… (2024-1766). Learn More »
Although generally classified as artillery short swords the M1832 short sword was initially carried by infantry NCOs and musicians until later restricted to heavy artillery in the regular army, though… (2024-2136). Learn More »
This is the spearhead section only from a broken lance. The piece meas. approx. 38.50 inches long overall. The iron point of the spearhead itself is double edged with a raised ridge on each side… (490-3235). Learn More »
This is a scarce 1861-dated U.S. government contracted and inspected M1850 foot officer’s sword in near excellent condition showing a pleasing slight, age patina, but with lots of original finish.… (597-16). Learn More »
$2,950.00
ON HOLD
This is a Fayetteville (North Carolina State) Armory produced bayonet manufactured for the model 1841 “Mississippi” rifle. This particular bayonet will also fit the muzzle of some upper lug .69… (1179-1252). Learn More »
$1,250.00
SOLD
This is very nice looking sword in very good condition with a soft, but not dark patina to gilt brass hilt and scabbard and silver grip and nice, bright blade with very visible etching showing just… (870-215). Learn More »
Very fine condition socket bayonet for the Palmetto musket. It has been cleaned, and exhibits light pitting throughout, with slightly heavier pitting on the socket. “SC” marking clearly visible… (490-7077). Learn More »
This M1850 staff and field officer sword comes beautifully etched and frosted with an ornately adorned scabbard. Etched with the Miller and Company of New York markers markings on the ricasso, the… (766-2033). Learn More »
This 45-70 bayonet is in good condition. Most of the original bluing is present while the locking ring operates as new. The socket shows some wear from light use but remains blued. The blade is… (2023-906). Learn More »
$175.00
SOLD
This Ames militia officer’s sword is in near excellent condition, with full length blade showing nice edge and point, smooth bright metal, with vivid etching on a bright frosted ground and Ames dry… (597-17). Learn More »
This beautiful French sword was acquired from the collection of the Colonel and features many desirable and unique characteristics. The 30.5” blade is adorned with intricate etchings of animals,… (766-2039). Learn More »
This sword style bayonet was manufactured in 3 iterations with distinguishing features. This piece is an example of the 2nd generation of bayonet with a classic “C” shaped hilt and a 1” stud… (490-7072). Learn More »
In civilian life these short hunting swords, originally intended to finish off wounded game, marked a gentleman and on the battlefield were convenient to carry, useful for personal defense, and served… (1256-217). Learn More »
$1,895.00
SOLD
A true treat for the Harpers Ferry collector, this Type II model 1841 “Mississippi” Rifle Bayonet features a bright blade, clear stampings, and a matching scabbard in excellent condition for its… (490-7071). Learn More »
$695.00
SOLD
A very good condition regulation scabbard for the socket bayonet used on the Model 1855 .58 Cal. Rifle Musket, and later patterns like the M1861, etc. The scabbard body is solid, a bit soft,… (172-6063). Learn More »
US regulation scabbard for the socket bayonet used on the Model 1855 .58 Cal. Rifle Musket, and later patterns like the M1861, etc. This is in good condition, showing issue and use, with some… (172-6059). Learn More »
This is one of the rarer variants of the standard US Model 1855-type socket bayonet that was produced near the end of the Civil War. The bayonet was manufactured for use with the US Model 1865 Joslyn… (2024-1874). Learn More »
This is a beautiful high-end example of the U.S. 1902 officer’s saber made by Eickorn of Solingen in excellent to near mint condition. The hilt and guard are steel, as mandated in December 1902, but… (2024-2063). Learn More »
This pattern of sword for wear by musicians was part of the 1840 series of arms that included new patterns of cavalry saber, officer’s sword, non-commissioned officer’s sword, etc. This is similar… (490-6745). Learn More »
A good example of the Moro kris, having the characteristic wavy blade of the kris, but made wider, heavier, and with more shallow curves, definitely a weapon made for cutting or slashing as well as… (490-6914). Learn More »
These broad bladed weapons could be used both as a dagger, chopper, or mounted on a pole for use a spearhead. Called a Hinalung, the handle is forged in one piece with the blade, simply folded round… (2023-800). Learn More »
This is a good example the sword/saber bayonet for the Remington Model 1862 US Contract Rifle, also known among collectors as the Model 1863 Contract Rifle, but best known as the “Remington… (401-56). Learn More »
Among the new standardized sword patterns adopted by the U.S. Army between 1832 and 1834 was a short sword modeled on the French 1816 pattern for artillerymen on foot. Looking like an ancient Roman… (1249-01). Learn More »
Blued blade measures approximately 9.75” long with an unstopped central fuller that runs approximately 6.75”. The blade surface is very clean with no nicks in the edge. Ricasso is marked with… (825-62). Learn More »
Blued blade measures approximately 9.75” long with an unstopped central fuller that runs approximately 6.75”. The blade surface is very clean with no nicks in the edge. Ricasso is marked with… (825-59). Learn More »
This brass hilt sword bayonet for the M1855 rifle is in very good condition and complete with scabbard. As is the case with the majority of these, the blade is unmarked since, like the rifles, they… (490-6888). Learn More »
This is a strong condition WW2 German K98 Mauser bayonet numbered “7802 / q” on blade and on the scabbard, with the letter indicating the batch or block designation and the number indicating the… (490-6950). Learn More »
Durkopp seems to have gotten out of making bayonets around 1940. This one is clearly marked Durkopp on one side of the blade and numbered 7331 with an “i” underneath it, the batch or block letter… (825-61). Learn More »
The M1910 bolo knife, made at Springfield from 1910 to 1918, had been issued to aid in cutting through undergrowth and clearing fields of fire. The Model 1917 Bolo was an improvement that omitted the… (169-673). Learn More »
Bright blade measures approximately 10” long with an unstopped central fuller that runs approximately 6.5”. The blade surface is very clean with no nicks in the edge. Ricasso is unmarked. Smooth… (825-63). Learn More »
Devoted to saving lives under fire, service as a Marine hospital corpsman took a special kind of courage. These wide bladed knives with rounded points were intended not for fighting, but to cut wood… (169-660). Learn More »
Wide bladed knife with rounded point designed to cut wood and bamboo to fashion temporary splints, poles, stakes, stretchers, or whatever else might be necessary to aid or evacuate a casualty in the… (169-658). Learn More »
A very good example of the wide bladed knife with rounded point designed to cut wood and bamboo to fashion temporary splints, poles, stakes, stretchers, or whatever else might be necessary to aid or… (169-661). Learn More »
These scarce knives were adopted by the U.S. Army Air Force in October 1942 for use in the B-4 Emergency Bail Out Kit, fitted with a metal blade guard and carried in a gray scabbard usually attached… (169-944). Learn More »
If you want a Confederate Bowie knife not just like the one in the book, but actually the one in the book, this could be for you. It is pictured and described in the 2008 updated Confederate Bowie… (1251-01). Learn More »
$1,495.00
ON HOLD
This is a good example of the bayonet and scabbard for the French1886 Lebel Rifle, France’s basic infantry rifle through World War One, 8mm (which led the way for small bore infantry rifles,) bolt… (362-1093). Learn More »
This is a very good example with nice, light colored wood grips showing good finish, and good definition and no chipping to the finger grooves of the grip, which has strong “US” stamp on one side… (2024-510). Learn More »
$450.00
ON HOLD
This is a good example of the brass-hilted sword/saber bayonet for the Remington Model 1862 US Contract Rifle in Moller’s terminology or the “Model 1863 Contract Rifle” in Flayderman’s, and… (490-6793). Learn More »
This attractive presentation sword was given to Colonel John Crawford Walker by the “officers of his corps,” the 35th Indiana, also known as the “First Irish.” The presentation is… (2024-274). Learn More »
$3,750.00
ON HOLD
Original black bridle leather scabbard and frog. The body is in very good condition. The stitched seam running up the back is complete and unbroken. Leather shows moderate crazing but little loss of… (490-3266). Learn More »
Very good condition with deep “ROSE” stamp at ricasso. Blade measures 14.5” long and 1” at widest point. Socket measures 2 7/8”. Bayonet exhibits often seen casting flaw. All smooth deep… (490-7075). Learn More »
$1,250.00
ON HOLD
All metal smooth with semi-bright finish. Small amount of pepper pitting on socket. Deep “US” stamped on blade flat. Socket measures 3”. Blade measures 14.5”. Very fine example of this rare… (490-7076). Learn More »
VF condition with nice, smooth metal with even gray patina. Blade measures 14.5”, socket 2 5/8”. Blade with nice “US” stamping. Scarce bayonet. … (490-7078). Learn More »
An excellent condition army trench or general purpose knife, with contoured, unmarred, wood grip fastened with three rivets, and scored with eight slanting grooves on each side for a more secure… (490-6780). Learn More »
This is an unusual saber: the blade and scabbard are the M1840 style, but the grip is the Model 1860 style, though it should really be the M1857/60 style given the actual dates of development and… (2024-444). Learn More »
$795.00
ON HOLD
This is a good example of the saber bayonet for the Lancaster oval-bore sappers and miner’s carbine. This uses an attractive brass hilt with black pressed leather grips secured with rivets and has… (169-615). Learn More »
$275.00
SOLD
Edward Barnes of Sheffield worked with his sons from 1845 to about 1871 when son Isaac took over the company. This is a very good example of one of their knives made for the Civil War American market,… (2024-1400). Learn More »
$395.00
ON HOLD
This officer’s sword not only bears a presentation inscription on the upper scabbard mount and battle honors on the middle mount, it comes with its original gold bullion officer’s sword knot and… (1052-1134). Learn More »
This is one of Nathan Starr’s improved Model 1812 sabers, also known as the 1812/13 pattern. Starr was burdened with changes to the number ordered by federal government- from 1,000 to 5,000, and… (490-3562). Learn More »
This brass hilt sword bayonet for the M1855 rifle is in very good condition and is complete with scabbard. As is correct, the blade is unmarked- a few were stamped US, but the majority were not: like… (490-6889). Learn More »
Very fine condition with deep “ROSE” stamp at ricasso. Blade measures approx. 14.5” long and 1” wide at ricasso; socket is 2 ½”. Socket exhibits often seen casting flaw and has “84”… (490-6892). Learn More »
$1,095.00
SOLD
This is a very scarce US Model 1832/34 sword for officers of infantry, artillery and ordnance made by Ames on contract with the U.S. government for officers of the regular army and inspected by Major… (870-318). Learn More »
This Federal accoutrement is an original and handsome angular socket bayonet made for the Model 1842 musket. The importance of this bayonet lies in the fact that it set the precedent for virtually all… (490-6891). Learn More »
$250.00
SOLD
This is a U.S. Model 1819 Socket Bayonet for the Hall Rifle as manufactured at Harpers Ferry. The US M1816/22/27 series of bayonets feature a 16” blade, face flute of varying lengths, a T-shaped… (490-6893). Learn More »
This regulation M1850 Staff and Field Officer’s Sword was carried by an officer with a good combat record, being twice wounded in action, once as a line officer and once while Major while owning… (1052-1133). Learn More »
This Federal accoutrement is an original and handsome angular socket bayonet made for the Model 1842 musket. The importance of this bayonet lies in the fact that it set the precedent for virtually all… (490-6894). Learn More »
$225.00
ON HOLD
This is an original Model 1855 socket bayonet for .58 caliber Civil War era Springfield rifle muskets. Measures approximately 21” overall. This specimen features a smooth, clean, and mostly bright… (490-6974). Learn More »
$250.00
ON HOLD
This is an original Model 1855 socket bayonet for .58 caliber Civil War era Springfield rifle muskets. Measures approximately 21” overall. This specimen features a smooth, clean surface. Covered… (490-6971). Learn More »
$175.00
ON HOLD
This is a striking presentation sword with the upper mount engraved in a mix of block letters, Old English, and script, with flourishes: PRESENTED TO / Capt. Wm Wood / BY/ his fellow Citizens of… (1052-1136). Learn More »
$9,500.00
SOLD
A very good example of the World War Two utility knife made by Kingston for the USMC. All steel construction. “Kingston” marked on the lanyard loop, a little light on the first three letters, but… (169-635). Learn More »
$110.00
ON HOLD
This Sharps NM1859 Rifle saber bayonet fits the parameters for those supplied to the US Navy by Ames to go with the Mitchell contract Sharps rifles they ordered in 1861. See Marcot, Paxton and Marron,… (490-6886). Learn More »
An excellent condition hunting Bowie with staghorn grips and clip-point blade. The grips are excellent, with nice cream and brown color and good surface with no cracks, chips or damage, oval guard,… (2-668). Learn More »
The blade of the sword is so slightly curved that it looks straight at first glance. It is single-edged with a false edge extending back about 6 inches from the point. There is a wide deep fuller… (870-365). Learn More »
$1,875.00
ON HOLD
This non-regulation officer’s sword bears an 1861 presentation on the obverse scabbard, “Presented to/ Lieut. C.J. Murphy, / by his friends / 1861” and a list of battles on the reverse… (1052-1131). Learn More »
Charles Henry Tobey did three tours of duty during the war and this sword dates to his service as an officer, from January 1864 to muster out in July 1865, in the 58th Massachusetts, a regiment in the… (1052-1132). Learn More »
This is a very good example of the M1910 bolo knife issued to aid in cutting through undergrowth, partially inspired by its experiences in “Uncle Sam’s Little Wars” of the late 1800s and early… (169-668). Learn More »
The Indian Princess figural pommel was popular US sword motif between 1821 and 1850 by most dating. This one is nicely marked on the scabbard by Horstmann and Sons of Philadelphia and likely dates to… (1240-09). Learn More »
$975.00
ON HOLD
This Klingenthal made US Model 1850 foot officer’s sword bears a dead-real period inscription on the reverse of the scabbard throat reading: Robt. L. Orr / Independent / Greys. Orr had been active… (1052-1127). Learn More »
This is a very good example of a cavalry officer’s saber presented to a field-grade officer of infantry who would be serving mounted. The sword bears an inscribed presentation and also comes with a… (1052-1126). Learn More »
This sword was presented in September 1862 to a field officer who had very active field service from 1863 though 1865, including mention in the official reports as acting as aide-de-camp in the field… (1052-1124). Learn More »
$5,000.00
SOLD
Primitive, but cheap and easily made, pikes were recognized as a stop-gap measure until better arms could be obtained and were made throughout the south by small and large manufacturers with various… (490-6818). Learn More »
An elegant British light cavalry officer’s 1796 saber with scabbard and sword knot, showing bright, with lots of gilt left on the brass scabbard and hilt. This has a clip point and reverse-P guard… (1240-11). Learn More »
This regulation U.S. M1840 Medical Staff sword bears an elegant inscription in script: B.F. Taft/Asst. Surgeon 20th Mass. Vols./Fredericksburg on the obverse scabbard between the upper and middle… (1052-1118). Learn More »
This original Model 1850 Foot Officer’s sword by Ames comes with the original brass throat portion from its leather scabbard. This sword measures 36.5” overall, with a 30.5” steel blade. Blade,… (1052-681). Learn More »
$1,950.00
ON HOLD
This weapon is a Model 1860 Light Cavalry saber. Considered a lighter, more maneuverable weapon than its predecessor the Model 1840 “Wristbreaker”. A fine representative saber issued to countless… (1192-01). Learn More »
This German hunting sword has lots of gilt finish left on the brass mounts of the hilt and a very clean blade showing deeply etched floral and animal motifs, along with a poem, with etching showing… (2024-273). Learn More »
Here is a very nice example of dagger or boot knife. European style, possibly Spanish. Measures 14” overall with a 9.5” double edged blade. Brass “S”-shaped cross guard is approximately… (2022-650). Learn More »
This Federal edged weapon is an Ames Model 1832 U.S. Foot Artilleryman’s short sword in excellent original condition. Handsome and ruggedly made, this blade specimen is a product of the Ames… (490-6822). Learn More »
Excellent condition leather scabbard for a socket bayonet for the Austrian Lorenz rifle. Measures approximately 20” long overall. Iron throat features characteristic “X” opening for the… (1179-2040). Learn More »
This is an excavated example of the regulation Civil War US Navy cutlass. These are still referred to as the Model 1860 in collector shorthand, though the contract for this pattern was signed in June… (490-6744). Learn More »
$550.00
ON HOLD
This British-made accoutrement is an original saber bayonet made for the Enfield .577 caliber rifle musket. The bayonet, with its Yataghan-style blade measures 28” long with a 23” blade and has a… (1179-1289). Learn More »
The State of Massachusetts contracted with the firm of A.J. Drake of Boston to alter 1,742 Model 1841 Mississippi Rifles that were in state stores. The guns were unaltered in caliber (retaining… (490-6787). Learn More »
Knife meas. approx. 8.00 inches. It has a nice worn curved stag horn handle with a curved metal blade and scrapper. Just above the handle on one side the blade is marked “WILKINSON” in three… (772-152). Learn More »
This elegant, cutlery handle Bowie has a double-edged spearpoint blade with median ridge and long pointed ricasso. On one side the ricasso is stamped “H. C. BOOTH & CO / SILVER STEEL /… (450-215). Learn More »
This is a good example of the short sword or side knife issued to foot troops in the mid to late 1800s for use in constructing fortifications and clearing undergrowth, but also as a potential last… (462-327). Learn More »
This is a good example of the brass-hilted sword/saber bayonet for the Remington Model 1862 US Contract Rifle, best known as the “Remington Zouave.” The blade is full length, with good edge and… (490-4297). Learn More »
This knife uses a brass hilt in the form of the Model 1833 Short Sword and the blade of the Model 1849 Rifleman’s Knife. Just 1,000 of the latter weapons were supplied by Ames on contract with the… (1220-01). Learn More »
This officer’s sword features a 31.5" slightly curved single-edged spear point blade with 24" unstopped median fuller and a narrow 16.5" long fuller along the spine. Blade 1.125" wide at the ricasso… (1085-06). Learn More »
This Model 1850 foot officer’s is nicely etched by Ames on the blade ricasso and also stamped by the company on the reverse of the gilt brass scabbard near the throat showing the scabbard was not… (870-645). Learn More »
This heavy cavalry saber, commonly referred to as Model 1840 wrist breaker was one of the military sabers used by U.S. mounted forces before and during the Civil War. Made by Gebruder Weyersberg of… (410-646). Learn More »
A striking, published example of an 1840 militia officer’s sword presented to Captain Richard Lilly of the “First Baltimore Sharp Shooters" in 1847. Excitingly, a period newspaper describes the… (846-550). Learn More »
The “Gulick Guards” were organized in New York City in 1836, composed largely of firemen, current and former, and apparently taking their name from the former Chief Engineer of the Fire… (870-690). Learn More »
Overall length: 39 1/4". Blade length: 32". The blade has a single wide fuller with a secondary fuller near the spine. Blade is etched over about 2/3 of its length with various foliate motifs and a… (1081-26). Learn More »
Camp axes were privately purchased by soldiers for common chores like chopping firewood when in winter camps or even barracks. This one nicely carved on the handle by the soldier with his name, likely… (1179-710). Learn More »
This sword comes from the extensive and esteemed collection of Kevin Hoffman, who classified it as a ca. 1850-1860 general officer’s sword. In support of that identification the sword still retains… (870-672). Learn More »
The drawn sword meas. approx. 35.00 inches long. The plated blade itself meas. approx. 29.75 inches long x 0.75 of an inch wide at the ricasso. It has a central fuller that starts just above the… (150-354). Learn More »
$3,150.00
Originally $3,500.00
Tiffany & Company is acknowledged as the finest producer of presentation swords in the 1860s and this is good example of their work, showing detailed craftsmanship and refined taste. The deeply… (870-172). Learn More »
$10,800.00
Originally $14,400.00
Overall, the bayonet meas. approx. 25.25 inches long from point to pommel. The blade itself is 19.50 inches long with a semi-bright surface with light scattered mottling and minor pitting in the point… (169-602). Learn More »
Brass hilted saber bayonets made by Boyle and Gamble in Richmond are quickly recognizable by their flat-sided bird’s head pommels and rounded ridged grips. This one has a mellow patina to the brass… (490-3213). Learn More »
Offered here is a scarce and superb Model 1840 Medical Staff sword by N.P. Ames. The sword and scabbard measure approximately 37.5” overall. Blade is 30” long. Blade surface remains bright with… (362-1118). Learn More »
The drawn bayonet meas. approx. 28.25 inches long from point to pommel. The bright blade meas. 23.00 inches with a 15.00 inch unstopped central fuller. One side of the ricasso bears the Austrian crest… (490-4163). Learn More »
Full length Enfield sword bayonet. Overall length is approx. 28.00 inches long. Blade is semi-bright with heavy surface mottling and one small spot of light surface rust. Blade is unmarked. True edge… (362-1124). Learn More »
This is very nice example of an American War of 1812 sergeant’s sword. Starr contracted for 2,000 of these swords in January 1813 and delivered them in small lots from June 1813 through March 1815.… (2023-2678). Learn More »
$3,825.00
Originally $4,250.00
Starr contracted for 2,000 of these cutlasses 21 August 1826 and delivered them by June 1827, when they were inspected by Elisha Tobey. Scabbards were apparently specified after the signing of the… (2023-2677). Learn More »
$1,935.00
Originally $2,150.00
This English bayonet measures approximately 20.5” long overall with a 17.25” long blade and a 3” socket. Locking ring rotates well. Bayonet is pewter color overall. Blade flat is unmarked. Elbow… (490-5563). Learn More »
Introduced into the army in 1841, these swords follow the general lines of the 1834 pattern in using a “cut-and-thrust” blade with a double-clamshell guard, but employ a spearpoint blade with… (160-182). Learn More »
The 1834 US Revenue Marine Officer’s Sword is a beautiful sword to begin with, tough to find, and this one is additionally rare in bearing a presentation on the reverse counterguard, and a rather… (1052-539). Learn More »
$4,500.00
ON HOLD
The blade meas. approx. 20.00 inches long with a 13.25 inch unstopped central fuller. The blade’s surface is clean and bright. The last third of the blade shows some very light oxidation. The true… (1184-59). Learn More »
The blade meas. approx. 22.00 inches long with a 14.00 inch unstopped central fuller. The blade’s surface is clean and bright with some minor mottling near the point and light hard to see oxidation.… (218-600). Learn More »
The blade meas. approx. 21.50 inches long with a 16.50 inch central fuller. The blade’s surface is semi-bright with moderate scattered mottling and light scattered surface pitting. The true edge has… (490-3211). Learn More »
Overall the bayonet meas. approx. 25.25 inches long. The blade itself is 20.25 inches long with a 13.25 inch long fuller. The blade surface shows hints of brightness but it is heavily mottled with… (490-5230). Learn More »
Saber-style bayonet for the Sharps Rifle. The overall length of this bayonet is 26.75” while the graceful-looking, slightly curved blade itself is 22” long. Bayonet was primarily intended for… (169-594). Learn More »
Here is an example of an early state marked US 1798 Contract Socket Bayonet. As is typical of most of these bayonets, delivered in conjunction with the US 1798 contract muskets. As is typical of… (169-610). Learn More »
Bayonet is in good overall condition. The surface has scattered light pitting with a brown patina. Measures approximately 19” long overall with 3” socket. Top fuller is 9” long. Small, and… (490-3271). Learn More »
Overall length of the bayonet is 26.75 inches. The blade itself meas. just under 22.00 inches long with a central fuller that meas. approx. 14.25 inches. The true edge is free of nicks while the blade… (169-616). Learn More »
This is an extremely rare M1840 U.S. artillery officer’s saber made by Ames but etched and retailed by Schuyler, Hartley and Graham. Thillmann knew only of this one example, and until it was found… (870-637). Learn More »
$10,500.00
Originally $13,950.00
This presentation sword has very impressive deeply cast and chased mounts and silver gripped hilt. Schuyler, Hartley and Graham assembled and sold a wide variety of swords that were often highly… (870-653). Learn More »
$5,750.00
Originally $7,650.00
This elegant and very high quality, non-regulation presentation staff and field officer’s sword was formerly in the renowned collection of Kevin Hoffman and is pictured both his book, “Swords of… (870-650). Learn More »
$5,625.00
Originally $7,500.00
This steel-hilted saber is modeled on the British 1796 light cavalry saber and the style was very popular in American mounted units from before the War of 1812 right into the 1840s. This has a very… (870-624). Learn More »
$2,395.00
Originally $3,150.00
This accouterment is an original Civil War socket bayonet made by the Collins & Company of Collinsville, CT. The total length of the bayonet is 21” long while the blade itself is approximately… (169-593). Learn More »
Confederate artillery short swords are collecting category of their own. This one shares enough characteristics with those of Boyle and Gamble to suggest a Richmond connection, but is possibly by… (870-484). Learn More »
$3,000.00
Originally $4,000.00
ON HOLD
Manufactured: Solingen Maker: Weyersberg / Horstmann Year: Sword undated, scabbard 1861 Model: 1832 Size: 19.25 inch blade The W. H. Horstmann company had a strong association with the Gebruder… (870-466). Learn More »
$1,350.00
Originally $1,800.00
ON HOLD
Overall length of the bayonet is 24.50 inches. The blade itself is 19.50 inches long with a central fuller that meas. approx. 15.25 inches. The true edge is free of nicks while the blade surface has a… (169-589). Learn More »
This pattern was introduced in 1840 for all mounted officers other than cavalry, but with the introduction of the 1850 patterns it was limited to officers of light artillery, making it very scarce. On… (870-635). Learn More »
$12,750.00
Originally $17,000.00
W. Clauberg of Solingen was a prolific (according to Thillmann, the most prolific) maker of swords for import into the U.S. Specializing in higher quality workmanship, their blades show up with many… (870-655). Learn More »
$2,295.00
Originally $3,050.00
James P. Fitch got his start in the military goods business with Schuyler, Hartley and Graham. He set up his own business as a retailer in New York City in September 1862. He was joined in the… (870-639). Learn More »
$2,595.00
Originally $3,450.00
Manufactured: France Maker: Klingenthal / E. Lyon Year: CW Period Model: M 1851 General Officer Sword Size: 31.00” Condition: VG M 1851 General Officer Sword. Scarce pattern that is a cross between… (870-355). Learn More »
$2,025.00
Originally $2,700.00
New patterns of swords for the U.S. army were developed from 1832 to 1834. This elegant smallsword pattern (variously called by collectors the 1832 or 1834 pattern) was designated for officers of… (870-325). Learn More »
$3,375.00
Originally $4,500.00
Following the Russian-Swedish war (2/1808 – 10/1809), the Swedish military developed new weapons. Their first step was the French inspired M-1811 musket, which with small changes was basis for the… (169-606). Learn More »
This is a fine example of the earliest regulation British military socket bayonet. The Land Pattern Socket Bayonet was the first somewhat standardized socket bayonet utilized by the British… (490-3252). Learn More »
This is a U.S. Model 1819 Socket Bayonet for the Hall Rifle as manufactured at Harpers Ferry. The US M1816/22/27 series of bayonets feature a 16” blade, face flute of varying lengths, a T-shaped… (490-4426). Learn More »
Among the new standardized sword patterns adopted by the U.S. Army between 1832 and 1834 was a short sword was modeled on the French 1816 pattern for artillerymen on foot. Looking like an ancient… (870-465). Learn More »
$1,695.00
Originally $2,250.00
Manufactured: Springfield, Mass. Maker: N.P. Ames Cutler Year: Early Springfield address Model: M1832 Size: 31.5 inch blade Condition: VG-Exc Throat and drag mounts only. Unusual top mount with single… (870-319). Learn More »
$4,395.00
Originally $5,850.00
This substantial archive descended in the family of Joseph Lee Smith Kirby (4 Nov. 1841- 28 July 1933,) who left West Point to join the Confederate Army in 1861 and was among the last to surrender in… (870-310). Learn More »
$23,750.00
Originally $31,500.00
SOLD
Smith, Crane and Company pieces are scarce. They were only in business from 1858 through 1862, retailing military goods in New York City. Their swords were imported, of German make and likely by… (870-263). Learn More »
$3,000.00
Originally $4,000.00
ON HOLD
A remarkable sword manufactured by W.H. Horstmann & Co., New York after the Model 1834 US Revenue Cutter/Marine sword. Neatly engraved on the reverse folding guard, “Geo. Wm. Gordon / United… (870-60). Learn More »
$7,500.00
Originally $9,000.00
This is a unique opportunity to acquire a one-of-a-kind U.S. cavalry officer’s saber. Frederick W. Widmann emigrated to the U.S. in 1816 and set up business in Philadelphia as a die-sinker and… (870-279). Learn More »
$10,125.00
Originally $13,500.00
SOLD
Very rare Ames with gold washed, quillback, Damascus blade from Solingen. Manufactured: Springfield, MA / Solingen Maker: N.P.Ames Year: C1840s Model: M1840 Size: 33 5/8 inch blade length, 1.18… (870-238). Learn More »
$10,125.00
Originally $13,500.00
High grade, pre-war Militia officer by Horstmann with the unusual feature of no U.S. designs on the blade and a federal shield with 7 stripes and no stars on the scabbard. Manufactured: Philadelphia,… (870-208). Learn More »
$1,795.00
Originally $2,375.00
Manufactured: Newark, NJ Maker: Sauerbier, Henry Year: Early Civil War Model: Model 1840 transitional with 1860 style grip Size: 34.2 inch blade, 1.17 wide, .353 thick This sword has all true Type 1… (870-159). Learn More »
$4,400.00
Originally $5,850.00
ON HOLD
Manufactured: England Maker: Unmarked Year: C1820-25 Model: Mamaluke Size: 35.8 inch blade, 1.21 wide Condition: Excellent+ Tri-color blade - blue, gold and "white" of flat design. Ship's… (870-76). Learn More »
$6,000.00
Originally $8,000.00
Original Civil War Model 1850 Field & Staff officer’s sword in nice condition complete with its metal scabbard. Sword is unmarked and is no doubt an import item. It is identified by a… (870-157). Learn More »
$12,250.00
Originally $16,200.00
This is a very early and possibly unique Confederate cavalry saber, possibly even a cavalry officer’s saber, by Louis Froelich. It uses a crudely cast, heavy, thick guard, with the side branches… (870-614). Learn More »
$7,500.00
Originally $10,000.00
This 1860 Staff sword bears the keystone blade stamp of Emerson and Silver at the base of the blade on one side and the etched retailer’s address on the other side: “EVANS / & / HASSALL /… (870-404). Learn More »
$1,195.00
Originally $1,595.00
Manufactured: France Maker: Klingenthal Year: CW Size: 32 inch blade This example is in excellent condition. Scabbard retains most of the original blue finish. Mounts and drag are high grade and cast… (870-350). Learn More »
$1,995.00
Originally $2,650.00
The drawn saber meas. approx. 41.00 inches from point to pommel. The blade meas. approx. 35.00 inches with a central fuller that is 26.50 inches long. The surface of the blade is very clean and… (870-179). Learn More »
$2,695.00
Originally $3,550.00
This exceptional, silvered Model 1850 staff and field officer’s presentation sword was given to a twice-wounded captain of the Anderson Zouaves by the men of his company. The sword was made by Ball,… (870-138). Learn More »
$15,000.00
Originally $20,000.00
Manufactured: England Maker: William Harvey Year: 1840 - 1850 Model: Mameluke Size: 30.25 Condition: VG Wonderful Mamaluke Saber manufactured in England. Most likely for a British officer… (870-74). Learn More »
$3,375.00
Originally $4,500.00
This style Eagle hilt was described by the Navy in 1830 and became the pattern for the regulation Model 1841. Manufactured: England / Norfolk, VA Maker: Joseph Rogers & Sons Year: C1830s … (870-51). Learn More »
$6,075.00
Originally $8,100.00
The Ames Sword Company catalog of 1882/83 lists this sword as number 538 and describes it as the “Old Regulation Revenue and Marine,” by which they mean the old regulation “Revenue-Marine,”… (870-38). Learn More »
$3,000.00
Originally $4,000.00
Manufactured by the Newark, New Jersey firm of Henry Sauerbier. Sword meets all the normal requirements for this sword with a few exceptions. It has a metal scabbard instead of the normally seen… (870-32). Learn More »
$1,695.00
Originally $2,250.00
This iron hilted sword shows the “Republican simplicity” of many U.S. swords dating to the early Republic, about 1795-1810. It is unmarked and the grip is a simple cylinder of dark wood with just… (2022-798). Learn More »
Foreign import, with Prussian term “Eisenhauer” [iron proof] embossed in cursive script above the obverse ricasso. Bright ding-free blade measuring 33.25” in length. Displays crisp floral… (939-01). Learn More »
$2,100.00
Originally $2,250.00
Manufactured: U.S. Maker: Unmarked Year: C1820-25 Model: Mamaluke Size: 29.25 inch blade 1.30 in. wide Condition: Excellent+ Sharply curved, single edged, blue and gold engraved blade… (870-72). Learn More »
$12,150.00
Originally $16,200.00
Here is an original example of an Ames 1862-dated government naval boarding. Blade measures 26” long, 1¼” wide at the ricasso and has a flat back with a single, wide, unstopped fuller. Blade is… (870-20). Learn More »
$2,025.00
Originally $2,700.00
An unusual pattern variant made in 1864. The maker or more likely the supplier’s name is on the top scabbard mount and reads: “V. Labruna/in/Napoli”. The grip is 3 7/8” long and topped with… (870-17). Learn More »
$4,050.00
Originally $5,400.00
A rare pre-war pattern of the 1852 naval officer's sword. Presented to: “Lt. Jas. H. Moore / U.S.N. /from his friend / Richd. W. Tyson / Feb. 12, 1857.” Manufactured: Philadelphia, PA; Maker:… (870-13). Learn More »
$1,995.00
Originally $2,650.00
Manufactured: New York; Maker: Tiffany & Co / PDL; Year: Civil War; Model: M 1860 Naval Officer Cutlass ; Size: 30.25; Condition: VG High grade naval officer’s cutlass from Tiffany &… (870-08). Learn More »
$8,100.00
Originally $10,800.00
This is a very good example of the type of bayonet used on the Model 1842 Musket. Measures approximately 20.5” overall. This specimen features a clean, bright finish. Complete with locking ring… (490-3747). Learn More »
$395.00
ON HOLD
This rare saber and matching metal scabbard is an original English Pattern 1853 cavalry saber manufactured by the London, England firm of S. Isaac Campbell & Company and is so marked. Saber is in… (1179-068). Learn More »
Isaac Barnes took over the Sheffield operation of his father, Edward Barnes, in 1871. Knives made by the firm as Edward Barnes or Edward Barnes and Sons had found an appreciative market in America and… (30-2230). Learn More »
$2,200.00
Originally $2,950.00
This is a nice example of the US regulation Model 1832 short sword with its scabbard that shows not only some of the changes in the marking of these swords over time, but also a very Confederate… (2022-2377). Learn More »
Fine condition Austrian bayonet with characteristic slanted mortise and four-sided blade. Measures 22” long. Metal surfaces are semi-bright and smooth with scattered darker mottling. The locking… (490-3744). Learn More »
This massive iron-mounted saber is surely a one-of-a-kind early example dating from the Mexican War era. The huge broad blade is polished bright. No edge nicks. Etched on both sides with American… (172-5869). Learn More »
This clip-point Bowie a great example of southern improvisation- a kind of weapons-making version of folk art – not sophisticated, but with an appeal of it own. Measuring 19.5 inches overall, the… (490-3265). Learn More »
Measuring 42 ½ inches overall, with a 35 ¾ blade that is 1 ¼ inches wide at the guard, this sword has a leather wrapped grip bound with two twisted strands of wire. The hilt is iron, with a long,… (490-3554). Learn More »
Bayonet is complete with a full-length triangular blade, socket and frozen locking ring. All are encrusted with a thin layer of rust. No markings are visible. Location of recovery is not known. … (490-3225). Learn More »
Bayonet is complete with a full-length triangular blade and socket with mortise. All is encrusted with a thin layer of rust. No markings are visible. Half-way down the length of one of the blades… (490-3272). Learn More »
This sword is patterned after the Ames manufactured 1859 Marine musician's sword but this post-war specimen was made by Horstmann of Philadelphia. The Marine version of the musician sword had a half… (1179-042). Learn More »
This is one of just five hundred produced after the redesignation of the M1880 knife as an entrenching tool in 1892 and is carried in the correct fifth type scabbard, introduced in 1890, using a… (490-3261). Learn More »
This is one of the first 1,000 Model 1880 hunting knives produced in early 1881 that used an iron guard and handle socket, and is housed in one of the scabbards modified in 1888 by the addition of a… (490-3260). Learn More »
This double-edged spearpoint Bowie or side knife is 12 inches long overall and has a 7-inch blade measure 1-inch wide at the guard. It has German silver mounts: a flat crossguard with scalloped edges… (2022-1061). Learn More »
This is a scarce US military knife bayonet. Kiesling gives total production as 2800, with 1500 going to the Philippines and 500 to Cuba for field trials in response to complaints that the standard… (490-3246). Learn More »
$2,750.00
ON HOLD
This sword measures approximately 34” long from point to pommel. The blade is 28” long. It has a wide stopped fuller that is 19” long and a narrow fuller that is 21 ½” long. The blade remains… (1179-074). Learn More »
The Marine Hospital Service was an organization of Marine Hospitals dedicated to the care of ill and disabled seamen in the United States Merchant Marine, the U.S. Coast Guard and other federal… (490-2495). Learn More »
$2,250.00
ON HOLD
This extremely rare tinned iron scabbard is for a clip-point Bowie knife and is slightly shorter, but a match for the scabbard on a rare Virginia D-guard Bowie made and marked by Boyle and Gamble,… (1052-17). Learn More »
Simon Backus Bissell was born in Fairlee, Vt., on October 28, 1808. He was appointed Midshipman on November 6, 1824, Passed Midshipman on June 4 1831, and Lieutenant December 9, 1837. At the beginning… (870-63). Learn More »
$7,200.00
Originally $8,000.00
The 1832 short sword had been specified for infantry sergeants and musicians as well as enlisted men of foot artillery. With the distribution of the 1840 sword patterns the sergeants and musicians… (480-222). Learn More »
$2,250.00
Originally $2,500.00
Old habits die hard. Although we now know production of the new pattern cavalry saber intended to replace the heavy Model 1840 started in 1857, most still refer to them as the Model 1860. This is a… (2022-718). Learn More »
This is a nice example of a U.S. militia officer’s sword of the 1840s, pushing toward 1850 with its use of sharkskin grip. Peterson #116 is a nice parallel, though with a conventional bone grip. He… (490-2157). Learn More »
$680.00
Originally $850.00
Here is a very handsome and inscribed, original Model 1850 Officer's Staff and Field imported sword complete with its original metal scabbard. On the scabbard mount of this Civil War edged weapon is a… (490-06). Learn More »
$2,800.00
Originally $3,500.00
Completely blued socket bayonet that still retains all of the original finish throughout. Locking ring works well and blade has a crisp "US." Metal scabbard is clean and without any surface oxidation.… (490-1632). Learn More »
$395.00
Originally $495.00
ON HOLD
Bright blade meas. approx. 9 7/8 inches long with an unstopped central fuller that runs approx. 7 1/2 inches. The blade surface is very clean with no nicks in the edge. Blade does show some light… (E2654). Learn More »
$175.00
Originally $225.00
This is a very good, complete, classically Confederate cavalry saber with wood scabbard. Other known examples include one in the Wray Collection at the Atlanta History Center. Some collectors still… (172-5794). Learn More »
This relic condition bayonet was made for the US Model 1816 Flintlock Musket longarm. In time, the M1816 was converted to a percussion musket and the accompanying accoutrements could also be affixed… (179-1119). Learn More »
This is an a very nice example of the U.S. Model 1832 short sword, dated 1834, supplied to New York under the militia act and fitted with the state’s version of the US 1839 pattern artillery plate.… (1142-119). Learn More »
The drawn sword meas. approx. 36.00 inches long. The blade itself meas. approx. 31.00 inches long x 0.75 of an inch wide at the ricasso. It has a central fuller that starts just above the ricasso and… (2021-944). Learn More »
This rare bayonet is marked by the maker in a sunken cartouche with raised letters on the base of the blade reading “Eberle.” Charles Louis Eberle emigrated to the U.S. from Germany with brothers… (1052-86). Learn More »
This Model 1816 shows a small “US” on the base of the blade and several numbers on the neck: “80,” “3,” and what is likely a larger, rubbed “80.” This was carefully cleaned and is,… (1052-84). Learn More »
$225.00
ON HOLD
This book is titled “THE BOWIE KNIFE – UNSHEATHING AN AMERICAN LEGEND” by the well-known gun expert, the late Norm Flayderman. The volume was published in 2004 by Mowbray Publishing. The volume… (1100-288). Learn More »
Joseph E. Ebling helped raise the Phoenix Regiment, recruited largely among men of Irish extraction in New York City and otherwise known as the Corcoran Zouaves, the Irish Legion, 4th Regiment Empire… (172-5736). Learn More »
Leather scabbard is in good condition. The black leather body shows only light wear and crazing. No breaks. Stitching is complete with no splits. Brass tip is in place and is undented; two tacks are… (172-5612). Learn More »
This is a really nice example of the U.S. artillery short sword and belt. Adopted by the army in 1832, this gladius-pattern short sword was a big seller for Ames to the U.S. and state governments,… (1052-42). Learn More »
This is the Krag – Jorgensen bayonet used on the model 1892 Krag rifle. From point to pommel the drawn bayonet meas. approx. 16.00 inches long. The blade meas. approx. 11.50 inches with a central… (172-5712). Learn More »
The blade is approximately 21-3/8” in length. No stampings on the ricasso. Fuller is about 15” long. Blade is semi-bright with numerous file marks; looks to have been sharpened. The hilt is cast… (172-5668). Learn More »
Saber-style bayonet for the Sharps Rifle. The overall length of this bayonet is 26 ½” while the graceful-looking, slightly curved blade itself is 21 ½” long. Bayonet was primarily intended for… (1037-406). Learn More »
Metal scabbard with dark patina, 28.5” in length, with brass drag and frogged throat. Drag and throat exhibits dark dusky patina, attachment rivets missing. Scabbard displays slight curve, minor… (958-54). Learn More »
At top center is a large, full color, spread winged eagle sitting on a reddish brown fascine at the center of a sunburst and gold stars. Due to paint loss some of the stars are missing. The eagle’s… (945-353). Learn More »
This small group of items is identified to 1st Lieutenant Anthony A. Taylor of Company a, 15th Pennsylvania Cavalry who received the Medal of Honor for actions at Chickamauga. The first item in the… (945-352). Learn More »
$8,500.00
ON HOLD
Here is a very fine presentation quality, imported 'Knights Head' style sword specimen made for the American militia market. Official regulations in the 1830s through 1840s called for infantry officer… (169-137). Learn More »
$3,950.00
Originally $4,950.00
This exceptional knife is maker marked on the ricasso, “JNOWILL & SONS / SHEFFIELD”, and, “JNOWILL & SONS / SHEFFIELD” near the false edge. Measures 14 ½” total length when opened… (482-411). Learn More »
The blade of this interesting sword measures 26”. It has a main fuller running nearly the entire length with a secondary fuller approx. 18” of the length. The last 8 ½” of the blade has a false… (344-3245). Learn More »
This imported Civil War sword is an example of an original Model 1821 foot officer’s sword manufactured in France. The plain, unembellished, brass-hilted sword is complete with two broken portions… (172-4189). Learn More »
Here is a very fine quality, imported 'Knights Head' style sword made for the American militia market. Official regulations in the 1830s through 1840s called for infantry officer swords to have a… (172-3830). Learn More »
Maker mark: “Manson/ Sheffield”. Measures 11.25 in total length; spear-shaped blade 6.375” in length, 1.125” in width at base. Frosted blade inscription: “Never Draw Me Without… (172-3645). Learn More »
The blade of this knife is in excellent condition. Its surface is bright and clean and the edge is near perfect. There are only two rough spots along the length of the edge, these can be felt but are… (824-01). Learn More »
This Model 1860 Staff sword is a post-war piece in fine condition overall. Though not maker-marked, this Prussian-made sword blade, by Gebruder Weyersberg, was one of thousands imported by Horstmann… (172-3225). Learn More »
This saber was manufactured by the most highly respected Solingen, Prussia, and imported to the U.S. for use in the Civil War. The curved 35-½ inch blade is a gray dusky peppery patina with only two… (539-03). Learn More »
$1,800.00
Originally $2,200.00
This original condition Model 1860 Staff officer’s sword is one of many produced by various manufacturers from the Civil War to the turn of the century. Manufactured by the Philadelphia firm of… (344-105). Learn More »
Item meas. approx. 28.75 inches overall. The blade meas. approx. 23.75 inches long and is approx. 1.08 inches wide at the ricasso. Blade surface is bright with some scattered mottling. Heavier near… (344-158). Learn More »
Showing 1 to 217 out of 217
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Fine Condition Brass Infantry Bugle Insignia »
Selection Of Unframed Prints By Don Troiani »
Wonderful Condition Original Confederate-Manufactured Kepi For A Drummer Boy Or Child »
Old habits die hard. Although we now know production of the new pattern cavalry saber intended to replace the heavy Model 1840 started in 1857, most still refer to them as the Model 1860. This is a scarce example of one produced by Ames in 1859 and… (2022-718). Learn More »