Showing 101 to 120 out of 285
Also known as the Allen Drop Breech, these breech-loading rimfire rifles were produced in limited numbers at Worcester, MA, from 1860 to 1871. Flayderman estimates them at 1,500 to 2,000 all told, but… (172-6030). Learn More »
Produced at the Whitney Armory near New Haven, Connecticut early in the Civil War, this original long arm is often referred to as either the Plymouth rifle, the Whitneyville rifle or the Dahlgren… (2024-1698). Learn More »
$1,650.00
ON HOLD
This is a good, representative Spencer carbine, likely brought home by a veteran, sporterized slightly for use around the farm or taken west in the early years after the war. The carbine is the… (172-6026). Learn More »
This Smith carbine, complete and all original, rates very good or near fine for overall condition with lots of original finish, good markings, strong color to the metal and wood showing a little… (172-6029). Learn More »
With a body measuring just three inches, this bag-shaped flask is the smallest of six variations on the pattern recorded by Riling as made by James Dixon and Sons of Sheffield. This would be correct… (490-6976). Learn More »
This Smith carbine rates at least Fine for condition and near Excellent, approaching 80 percent original finish overall, even stronger on the barrel, with sharp lettering and numbers in both the metal… (1216-220). Learn More »
$3,500.00
SOLD
This single-shot pistol is in very good condition, with clear markings and original blued barrel and casehardening on the frame. This is their standard production with 4” long barrel,… (490-7031). Learn More »
Excellent condition, just about new-in-box miniature Colt Buntline. This has a case-hardened frame, blued barrel, and walnut grips, and is fitted with a folding rear sight on top of the flat frame.… (490-6814). Learn More »
This H-shaped, stamped belt plate was adopted by the U.S. Army in 1886 and used on what is sometimes called the “loose-loop” belt, which has woven cartridge loops. This clean blue belt and brass… (1216-219). Learn More »
This single-shot pistol is in very good condition, with clear markings. The barrel shows light surface wear with original blue remining under all. No case colors remain on the frame. This is their… (490-7037). Learn More »
$875.00
SOLD
This is an English Pattern 1853 rifle musket that was imported into the country and used during the Civil War. Likely imported into the North and then “captured or collected” by Confederate… (490-6966). Learn More »
This a small, very pretty York County powder horn in about excellent condition, with nicely turned spout matching the rich brown color of the upper portion of the horn that smoothly transitions into… (490-6906). Learn More »
This is a York County style powder horn made with a screw tip that is now missing, but with the upper portion of the spout clearly showing remnants of the threads that secured it. The form is… (490-6905). Learn More »
These small, unmarked, all-metal single action and singe-shot percussion pistols are the product of Bacon and Company of Norwich, CT, and manufactured in very small numbers from about 1852 to 1858, by… (490-7034). Learn More »
This is an early, classically York County style powder horn with two incised lines running around the top edge of the lathe-turned, convex base plug mirroring the two parallel incised lines along the… (490-6904). Learn More »
This is a good example of the famous Model 1858 Remington Army Revolver. Approximately 122,000 of these were manufactured between the years 1863-1873. This is a percussion, six-shot, .44 caliber… (2024-1580). Learn More »
$950.00
SOLD
Dr. Edward Maynard held patent #22,565 dated January 11, 1859. By this patent, cartridge cases for the Maynard carbine were made of drawn brass to form a tube with a closed end. A brass disk was… (1212-186). Learn More »
This is the combination tool for Snider-Enfield rifles. This style would have been made after September of 1866 when the Snider conversion of Enfield rifles was adopted. This is the usual British… (2024-503). Learn More »
In the search for new metallic cartridge arms after the Civil War the U.S. government went with the trapdoor system, but New York went with the Remington rolling block, which was popular elsewhere in… (172-5976). Learn More »
This is a two-piece, scissor-type bullet mold made of brass. The two halves are held together with an iron pin. One arm is marked with a “2”. The mold measures 7.25” long overall. Brass exhibits… (1211-256). Learn More »
Showing 101 to 120 out of 285
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
This image is not only mounted with a Whitehurst marked mat, but has a full thermoplastic figural case with a purple velvet facing pad embossed with a large eagle flourishing a ribbon reading “J.H. Whitehurst” and holding a shield or plaque with… (1138-1799). Learn More »
APRIL 12-13: SPRING GETTYSBURG MILITARY ANTIQUES SHOW; All Star Events Complex Learn More »