$2,950.00 ON HOLD
Quantity Available: 1
Item Code: 490-6799
The Ball carbine was designed and patented by Albert Ball of Worchester, Mass. Mr. Ball secured a patent for a breechloading, metallic cartridge carbine (#38,935) on June 23, 1863.
The patent rights were subsequently purchased by E.G. Lamson of Windsor, VT, to produce the carbine. Mr. Lamson managed to secure government contracts to deliver 1,000 of the patent carbines firing the 56-50 rimfire “Spencer” cartridge. Two sample Ball carbines were delivered to the Ordnance Department on January 17, 1865. With Ball now working as Lamson’s superintendent, the company proceeded to manufacture the 1,000 Ball weapons. None of which would be delivered before the end of the Civil War. The 1,000 contracted Ball carbines were all delivered on May 14, 1865.
The Ball carbine represented a sort of “improved” Spencer carbine. The Ball design used a tubular magazine, as did the Spencer, but it was mounted under the barrel of the gun, instead of in the buttstock. The seven-round magazine was loaded through the action, which was opened by lowering the trigger guard. This allowed the insertion of cartridges directly into the magazine tube under the barrel. The magazine was tensioned by a long spring, which had to be compressed and retained to allow loading. This was accomplished by pulling a long rod that resembled a cleaning rod, out from the fore end of the carbine. When the rod was fully extended, the spring was compressed and was captured by a small catch at the end of the fore end. Once the magazine was fully loaded, the catch was released and the spring tensioned the magazine to push the cartridges towards the action. The Ball operated much like a Spencer, lowering the trigger guard opened the action, ejected a fired cartridge case and allowed a fresh cartridge to be pushed onto the lifter. Closing the action chambered the round.
The Ball Carbine had a 20” round barrel and a two-piece walnut stock. A short sling bar and ring were mounted on the left side of the receiver. The barrel was blued and the receiver was case hardened, as were the trigger guard, hammer, and butt plate. The fore end of the carbine was secured by a barrel band about mid-way between the receiver and muzzle, and with a combination barrel band/end cap near the muzzle, which contained the magazine spring catch mechanism. The spring compression rod, which extends below the lower right side of the barrel was left “in the white” and was not finished.
This particular Ball Carbine remains in very nice condition. The gun is mechanically excellent and all systems function as they should, including the action, hammer, trigger and magazine system. The gun metal has a smooth dark gray color overall. The receiver and hammer is slightly brighter with some very light and scattered pinpoint pitting. The bore remains clean and bright with strong rifling. The left side of the receiver is stamped: “E. G. LAMSON & CO. / WINDSOR, VT. / U.S. / BALL’S PATENT / JUNE 23, 1863 / MAR 25, 1864.” The original leaf sight is at the breech and a blade sight at the muzzle. A small “S” inspection stamp is found on several parts on the carbine. The original sling bar and ring are present on the left side of the receiver. The buttstock and forestock of the carbine remain in very good condition with only a few minor bumps and dings. The left wrist retains a very crisp and clear cartouche.
Overall, this is a very nice example of a scarce late-Civil War carbine that just didn’t quite make it in time to reach the battlefields. [jet] [ph:L]
DISCLAIMER: All firearms are sold as collector's items only - we do not accept responsibility as to the shooting safety or reliability of any antique firearm. All firearms are described as accurately as possible, given the restraints of a catalog listing length. We want satisfied customers & often "under" describe the weapons. Any city or state regulations regarding owning antique firearms are the responsibility of the purchaser. All firearms are "mechanically perfect" unless noted, but again, are NOT warranted as safe to fire.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB SITE,
MAY BE PURCHASED THROUGH OUR LAYAWAY PROGRAM.
CLICK HERE FOR OUR POLICIES AND TERMS.
THANK YOU!
For inquiries, please email us at [email protected]
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Fine Condition Brass Infantry Bugle Insignia »
Selection Of Unframed Prints By Don Troiani »
Wonderful Condition Original Confederate-Manufactured Kepi For A Drummer Boy Or Child »
Zachary Taylor received the formal thanks of Congress three times, along with gold medals, for victories in the Mexican War, the largest number of such resolutions and awards made by Congress to anyone. This is an official State Department copy on… (766-938). Learn More »